STRIP, SEAL & WAX TILE FLOOR
First floors are stripped, thoroughly washed and dried, then 2 coats of protective sealer and 2 coats of wax are applied. Floors are always allowed to dry completely between each coat. The floors are then buffed using a Clarke Ultra Speed 2000 DC electric high-speed buffer that produces a brilliant high-gloss “wet look” shine. Matte finish is also available if requested.
First floors thoroughly washed and dried. The floors are then buffed using a Clarke Ultra Speed 2000 DC electric high-speed buffer that produces a brilliant high-gloss “wet look” shine. The dust control (DC) models are Clarke Green Certified. This new line of Ultra Speed® Burnishers are ideal for use in hospitals, schools and areas requiring dust-free, odour-free, quiet operation.
NOTE – Please keep in mind buffing can only be done provided there is ample wax on the floor. If not, then the above service is done using 4 coats of wax instead of 2 sealer & 2 wax.
POWER SCRUB CERAMIC TILE / CEMENT FLOOR
Using a 2 speed power scrubber, floors are scrubbed with the appropriate pad for the floor type. All dirt and water is then removed with a high power wet/dry vac. The floors are again damp mopped and dried paying extra attention to get right into the corners.
STEAM CLEAN CARPETS
A commercial-grade truck-mounted unit (CDS OverDrive™ 4.8 by Hydra Master) or a portable unit (200PSI Ninja hot water extractor by Esteam) are used as access allows. The truck-mounted CDS Overdrive unit has new power train and drive technology which increases vacuum performance by 25%, while lowering gas consumption 25% to 30%. The recovery tank and vacuum breaker designs have further increased usable airflow for dramatically improved water recovery. Carpets are left cleaner and drier! The Esteam CSA-US approved 200 PSI NINJA portable extractors are the world’s most popular extractors with performance and reliability like no other.
WINDOW CLEANING - In & Out
We use a water feed pole system by Tucker Pole. First a pre-soak agent is used, then soap is applied and scrubbed with a soft brush and finally rinse and dry agent is applied leaving a no streak finish.
Blinds are taken down, power steam washed outside, hung to dry and reinstalled.
A portable 11hp pressure washer is used taking care to use the appropriate nozzle for the surface being cleaned.